-Wheel half press-
The wheels used on most aircraft use split rims. This means that when you take the wheel off, you make sure all the air is out of the tire so when you take the through bolts out it wont explode the halves apart. Then when you want to put the halves back together, the new stiff tire holds the halves apart and you need a tool to hold the halves together while you put the through bolts back. I used the lathe to cut the threads out of 1 1/2 bar stock. I also used the lath to cut the cones out of 3in stock. The cones are free floating and have backing nuts that are used to tighten the wheel halves together so that you can easily insert the through bolts.
-Cessna 185 Wing jack points:
Moody needed some jack pads for there 185. So i made these up real quick. They attach to the wings with two bolts with nut plates installed in the wing spars.
